Set Iskander 18 (P2) Optima 680/40 Talcochlorite
Cast iron sauna stove with direct heating of the steam heater. Stove with 14 mm thick walls. Quickly heats the air in the steam room and produces high-quality fine steam due to the heat-capacity sauna heater equipped with heat-removing spikes on the bottom surface.
Facing “Optima” is designed for Iskander 18 and 25 stoves. It is made of natural stone. The cladding frames the stove from 4 sides stopping hard infrared radiation and filling the steam room with very soft radiant heat. The top of the cladding is filled with stones, which are placed on a special metal support. Using stones of fine or coarse fraction you can either completely block convection, if you need soft modes of Russian bath, or slightly strengthen it, if you like hot modes.
Talcochlorite is the most widespread and widely known stone used for facing stoves and finishing steam rooms. The place of extraction is Karelia. Used slabs only from the lower horizons, which have a higher quality of stone.
Equipment:
- Cast-iron stove Iskander 18
- Optima cladding
- starter pipe
- Ash box (structural steel)
- Portal extension for the furnace through the wall
- Heat-resistant sealant for assembly - 1 pc.
- Instructions combined with the passport
Have questions? Need help or advice?
Fill out the form, we will contact you shortly.